Enigma2 Plugins How to change the Mac address of any Enigma2 device

[Admin]

How to manually change the Mac address of any Enigma2 device with Telnet or alternative plugins like AJPanel or MultiStalker.

For those who want to try changing the Mac address of the E2 device...

The Telnet codes Manually as followed :



1 : To know the default Mac address for your device (6 numbers appear in the first line in the form 00:00:00:00:00:00) and it is Necessary to keep it

ifconfig

2 : Mac Address changes the device to the Mac of the portal that will be running, replacing xx with the numbers of the Mac

ifconfig eth0 down
ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
ifconfig eth0 up
ifconfig eth0 |grep HWaddr

3 : Return the default Mac address to the device after replacing xx with the numbers of the Mac

ifconfig eth0 down
ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
ifconfig eth0 up
ifconfig eth0 |grep HWaddr

☆ Knowing that the operation of the portals and the Mac depends on the server and the protection on it, and the operation is done through the different plugins, by deluding the server with the Mac address to run the portals
♦♦ There is plugin can do that from @ziko development from here




✪ Multistalker & AJPanel plugins do that auto with no need to use any alternatives